What to expect in Wisconsin's spring election



Wisconsin voters will choose a new state Supreme Court justice in a Tuesday election that will either maintain or expand the court’s liberal majority. Meanwhile, the city of Waukesha will hold its first open-seat mayoral race in 20 years.

The contests are among the notable highlights of Wisconsin’s spring election, where races for judicial, municipal, educational and other traditionally nonpartisan offices will be decided beyond the din of the more explicitly partisan November elections.

In the race for the high court, state Appeals Court judges Chris Taylor and Maria Lazar are running to replace retiring Justice Rebecca Bradley from the court’s conservative bloc. Taylor is a former Democratic state representative who has endorsements from the court’s four sitting liberal justices. Lazar served as assistant state attorney general under former Republican Gov. Scott Walker. She is endorsed by conservative Justice Annette Ziegler, who announced in March she will not seek a third term in 2027.

This year’s contest has not generated the same level of attention as recent Wisconsin Supreme Court races, since the ideological balance of the bench is not at stake. But the winner will be a part of a panel that could be at the center of a political firestorm if there are any disputes related to either the 2028 presidential election or the next round of congressional redistricting in the early 2030s. Justices are elected to 10-year terms.

Liberals are looking for their fourth consecutive state Supreme Court victory. Liberal justices gained a 4-3 majority on the court in 2023 for the first time in 15 years after Justice Janet Protasiewicz won a seat previously held by a conservative. In 2025, Justice Susan Crawford joined the court and preserved the liberal majority after a campaign where Elon Musk and groups associated with him spent millions in support of a conservative candidate.

In any statewide election in Wisconsin, Democrats tend to win by large margins in the populous counties of Milwaukee and Dane (home to Madison), while Republicans win by wide margins in the smaller, more rural counties that stretch across most of the state. Republican candidates also tend to rely on strong showings in the “WOW” counties — Waukesha, Ozaukee and Washington in suburban Milwaukee — which help counter Democratic advantages in urban areas. Victory is determined by how big those margins are in the respective party strongholds, as well as which side can win over the more competitive swing areas.

In the 2024 presidential election, then-Vice President Kamala Harris won Milwaukee County with 68 percent of the vote and Dane County with 75 percent, while narrowly losing statewide. In comparison, Protasiewicz and Crawford in their successful state Supreme Court races received 73 percent and 75 percent of the vote in Milwaukee County and 82 percent of the vote in Dane County. They both won statewide with double-digit margins of victory.

Protasiewicz and Crawford each also won more than 10 swing counties that voted for Trump in 2024, most notably in Brown County, home to Green Bay, which Trump carried in all three of his White House campaigns.

In the race for Waukesha mayor, Common Council President Alicia Halvensleben and state Rep. Scott Allen are running to replace Mayor Shawn Reilly, who is not seeking a fourth term. Allen has been one of the most conservative Republicans in the Legislature since his election in 2014. Halvensleben is the preferred candidate of the Waukesha County Democratic Party.

Reilly is an independent who left the Republican Party after the Jan. 6, 2021, insurrection at the U.S. Capitol. He has endorsed Halvensleben.

The Associated Press does not make projections and will declare a winner only when it’s determined there is no scenario that would allow a trailing candidate to close the gap.

Recounts are not automatic in Wisconsin, but a trailing candidate may request one if the winning vote margin is less than a percentage point.

Here are some of the key facts about the election:

When do polls close?

Polls close at 8 p.m. local time.

Who gets to vote?

Any registered voter in Wisconsin may participate in the spring election.

What does turnout and advance voting look like?

As of April 1, there were about 3.6 million active registered voters in Wisconsin out of about 4.5 million eligible voting-age adults. Voters in the state do not register by party.

Nearly 2.4 million votes were cast in the 2025 spring election for state Supreme Court, which was about 62 percent of registered voters. About 29 percent of voters cast their ballots before election day.

As of Friday, nearly 281,000 ballots had already been cast.

How long does vote counting usually take?

In the 2025 spring election, the AP first reported results in the race for state Supreme Court at 8:09 p.m., or 9 minutes after polls closed. The last vote update of the night was at 1:12 a.m. with about 99 percent of total votes counted. The race was called at 9:16 p.m.

When are early and absentee votes released?

In previous Wisconsin elections, counties varied in terms of when and how they released results from early and absentee voting. In the 2024 general election, roughly one-third of the counties released all or most of their early and absentee voting results in the first vote update, while the rest released them throughout the night along with results from in-person Election Day voting.

Are we there yet?

As of Tuesday, there will be 210 days until the 2026 midterm elections.



Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


What are SCCM Discovery Methods?

SCCM is required to find gadgets before it can handle them. It’s not compulsory to find PCs, on the off chance that you physically install the customer, it will show up in the console and it tends to be executed properly. The issue is that on the off chance that you have a thousand PCs, it tends to be a particular interaction. By utilizing Active Directory System Discovery, every one of your PCs will appear in the console, from that point you can decide to install the customer utilizing different SCCM techniques. Obviously in the event that you require data about your client and gatherings, you have to design User and Group discovery, it’s the best way to acquire this data SCCM. 

Why SCCM discovery methods?

The discovery recognizes PC and client assets that you can handle utilizing Configuration Manager. It can likewise find the organization framework in your environment. Discovery makes a discovery data record (DDR) for each found item and stores this data in the SCCM data set. At the point when a resource is found the data about the asset is placed in a document that is alluded to as a DDR. DDRs are handled by site servers and get into the SCCM database. From that point they are repeated by database replication with all destinations. 

Get ahead in your career by learning SCCM through hkrtrainings Microsoft SCCM online course

Types of SCCM Discovery Methods

There are six types of Discovery Methods that can be arranged. Every one focuses on a particular item type (Computers, Groups, Users, Active Directory) : 

1. Active Directory System Discovery

Finds PCs in your association from indicated areas in Active Directory. To push the SCCM customer to the PCs, the resources should be found first. You can indicate to find just PCs which have signed on to the area in a given timeframe. This choice is valuable to avoid old PC accounts from Active Directory. You likewise have the choice to get custom Active Directory Attributes. This is helpful if your association stores custom data in AD.

  • Open the SCCM Console
  • Go to Administration / Hierarchy Configuration / Discovery Methods
  • Right-Click Active Directory System Discovery and choose Properties

Active Directory System Discovery

  • You can enable the method by analysing Enable Active Directory System Discovery on the General tab.
  • Click the Star icon shown and choose the Active Directory container which you need to incorporate in the discovery process.

Active Directory container

  • Choose the frequency on which you require the discovery to occur on the Poling Schedule tab.
  • A 7 day cycle with a 5 minutes delta interval is usually applicable in most conditions.

Poling Schedule tab

  • You can choose custom ascribes to incorporate during discovery on the Active Directory Attribute tab. 
  • This is helpful on the off chance that you have custom information in the Active Directory that you need to use in SCCM. 

Active Directory Attribute

  • You can choose to find just records which have logged or refreshed their passwords since a particular number of days, on the Options tab. 
  • This is valuable if your Active Directory isn’t perfect. Utilize this to find great records.

Options tab

Check out here for frequently asked sccm interview questions & answers

SCCM Training

  • Master Your Craft
  • Lifetime LMS & Faculty Access
  • 24/7 online expert support
  • Real-world & Project Based Learning

2. SCCM Active Directory Group Discovery

Discovers groups from indicated areas in Active Directory. The discovery cycle finds local, worldwide or general security gatherings. At the point when you arrange the Group discovery you have the alternative to find the participation of distribution teams. With the Active Directory Group Discovery you can likewise find the PCs that have signed in to the space in a given timeframe. When found, you can utilize data for example, to make organization dependent on Active Directory groups. Be cautious while arranging this strategy : If you find a group that includes a PC object that isn’t found in Active Directory System Discovery, the PC will be found. On the off chance that automatic customer push is empowered, this could prompt undesirable customers PCs. 

To find resources utilising this methods :

  • Open the SCCM Console
  • Go to Hierarchy Configuration /Administration / Discovery Methods
  • Right-Click Active Directory Group Discovery and choose Properties.

 Discovery Methods

  • You can enable the method by analysing Enable Active Directory Group Discovery on the General tab.
  • Click on the Add button on the bottom to include a particular location or a specific group.
  • If you discover a group which includes a computer object which is NOT discovered in Active Directory System Discovery, the computer would be discovered.

General tab

  • Choose the frequency on which you require the discovery to occur on the Poling Schedule tab.
  • A 7 day cycle with a 5 minutes delta interval is usually applicable in most conditions.

 Poling Schedule tab

  • You can choose to find just records which have logged or refreshed their passwords since a particular number of days, on the Options tab. 
  • This is valuable if your Active Directory isn’t perfect. Utilize this to find great records.

the Options tab

3. Configuration Manager Active Directory User Discovery

Discovery process finds client accounts from determined areas in Active Directory. You additionally have the choice to bring custom Active Directory Attributes. This is valuable if your association stores custom data in AD about your clients. When found, you can utilize group data for instance to make client based arrangements. 

To find resources using this methods :

  • Open the SCCM Console
  • Go to Administration / Hierarchy Configuration / Discovery Methods
  • Right-Click Active Directory User Discovery and Choose Properties

Configuration Manager Active Directory User Discovery

  • You can enable the method by analysing Enable Active Directory User Discovery on the General tab.
  • Select the Star icon and choose the Active Directory container which you need to include in the discovery process.

Active Directory User Discovery

  • Choose the frequency on which you require the discovery to occur on the Poling Schedule tab.
  • A 7 day cycle with a 5 minutes delta interval is usually applicable in most conditions.

Enable Active Directory User Discovery

  • You can choose custom attributes to incorporate during discovery on the Active Directory Attribute tab.
  • It is useful if you have custom data in Active Directory which you need to utilise in SCCM.

delta interval

If you want to Explore more about sccm? then read our article SCCM Tutorial !

HKR Trainings Logo

Subscribe to our YouTube channel to get new updates..!

4. Active Directory Forest Discovery

Finds Active Directory subnets and sites, and makes Configuration Manager limits for each site and subnet from the forests that have been arranged for revelation. Utilizing this discovery strategy you can naturally make the Active Directory or IP subnet limits which are inside the discovered Active Directory Forests. It is valuable in the event that you have various AD Site and Subnet, rather than making them manually, utilize this technique to do the work for you. 

To find assets utilizing this methods :

  • Open the SCCM Console
  • Go to Administration / Hierarchy Configuration / Discovery Methods
  • Right-Click Active Directory Forest Discovery and select Properties

custom attributes to incorporate

  • You can enable the method by analysing Enable Active Directory Forest Discovery on the General tab.
  • Choose the required options

Active Directory Forest Discovery

5. Heartbeat Discovery

HeartBeat Discovery operates on each customer and to refresh their discovery records in the database. The records (Discovery Data Records) are shipped off the Management Point in a determined span of time. Heartbeat Discovery can drive disclosure of a PC as another resource record, or could also repopulate the information record of a PC which was erased from the database. 

HeartBeat Discovery is empowered and planned to execute each 7 days. To find resources utilizing this strategies : 

  • Open the SCCM Console
  • Move to Hierarchy Configuration /  Administration / Discovery Methods
  • Right click the Heartbeat Discovery and choose Properties

Heartbeat Discovery

  • You can enable the technique by analysing Enable Heartbeat Discovery on the General tab.
  • Ensure that this setting is empowered and that the timetable operates less much of the time than the Clear Install Flag maintenance task.

Install Flag maintenance task

6. Network Discovery

The Network Discovery scans your network framework for network gadgets which includes an IP address. It can look through the spaces, SNMP tools and DHCP servers to discover the resources. It likewise finds gadgets that probably won’t be located by other discovery strategies. This incorporates printers, bridges, and routers. 

SCCM Training

Weekday / Weekend Batches

 Conclusion

Configuration Manager utilizes an assortment of discovery strategies to assemble resource data and every one of the discovery techniques accumulates data about various items. You ought to comprehend its accessible configurations and restrictions to proficiently utilize a discovery technique. Hope this article assists you in understanding more about SCCM discovery methods.

Related articles:



Source link